Description
Semua sel pengukur konduktivitas analog dilengkapi dengan kompensasi suhu terintegrasi dan mencakup semua aplikasi
Di instalasi pengolahan air limbah, sebagai pengukuran aliran atau di dalam pipa: Solusi yang tepat untuk setiap aplikasi
Linearitas tertinggi oleh 4 sel pengukur elektroda
Keamanan operasional tinggi dengan desain yang kuat
You have the application – we have the measuring cell! With the conductivity measuring cells by WTW, measurements of 0.0001 µS/cm to 2 S/cm are not a problem. The unique 4 electrode measuring cell compensates for possible contamination and polarization effects. All measuring cells can be connected to the LF monitor LF 298 NTC (exception: TetraCon® 700).
TetraCon 700 – Designed as an immersion encoder specifically for use in wastewater treatment plants
Conductivity measuring cell with 4 electrode system, integrated temperature sensor, anti-slip electrodes and breakage-resistance shaft; measuring range 10 µS/cm to 1000 mS/cm.
Only as replacement armature for analog monitors of the Ecoline® or QuadroLine® series. Still available as digital version (IQ Sensor Net System 181).
TetraCon 325 – for universal applications
4 electrode measuring cell with graphite electrodes and integrated temperature sensor, measuring range 1 µS/cm to 2000 mS/cm.
LRD 01 – for the installation into pipelines
Conductivity measuring cell as V4A model. With integrated temperature sensor (up to 130 °C), measuring range 0.001 to 200 µS/cm, pressure-resistant to 14 bar, 1/2 inch NPT screw thread.
LRD 325 – for the installation into pipelines
Conductivity measuring cell with integrated temperature sensor (up to 100 °C). Measuring range 1 µS/cm to 2 S/cm, pressure-resistant to 10 bar, 1/2 inch NPT screw thread.
LR 325/01 – for pure water measurement
Pure water measuring cell with integrated temperature sensor and flow vessel, measuring range 0.001 to 200 µS/cm. Especially suited for the measurement of low conductivity values such as in boiler infeed water.
LR 325/001 – for trace measurement, also in partial and non-waterous media
High resolution trace conductivity measuring cell with integrated temperature sensor and flow vessel, measuring range 0.0001 to 30 µS/cm.
Technical Data
| Analog conductivity measuring cells | |||
|---|---|---|---|
| Model | TetraCon® 700 (SW) | LRD 01 | LRD 325 |
| Measuring principle | 4 electrode measuring cell | 2 electrode measuring cell | 4 electrode measuring cell |
| Measuring range | 10 µS/cm … 1000 mS/cm | 0,001 µS/cm… 200 µS/cm | 0.001 µS/cm… 200 µS/cm |
| Cell constant | K=0.917 cm-1 (in free solution) K=0.933 cm-1 (with flow fitting EBST 700-DU/N) | K=0.1 cm-1 | K=0.475 cm-1 |
| Temperature sensor | Integrated NTC | ||
| Temperature measurement | 0 … +50 °C | 0 … +130 °C | 0 … +100 °C |
| Max. pressure | 10 bar (at 20 °C) | 14 bar (at 20 °C) | 10 bar (at 20 °C) |
| Conductivity measuring cells for special applications | |||
|---|---|---|---|
| Model | TetraCon® 325 | LR 325/01 | LR 325/001 |
| Measuring principle | 4-electrode measuring cell | 2-electrode measuring cell | 2-electrode measuring cell |
| Measuring range | 1 µS/cm … 2 S/cm | 0.011 µS/cm … 200 µS/cm | 0.0001 µS/cm … 30 µS/cm |
| Cell constant | K=0.475 cm-1 | K=0.1 cm-1 | K=0,01 cm-1 |
| Temperature sensor | integrated | ||
